| Type |
Roped Hydraulic / 2 speed Valve, Single
Speed Motor |
| Capacity (MAX) |
1400 Lbs. |
| Car Size (MAX) |
18 Square Feet (per ASME A17.1)
3'-6" x 5'-0" Clear Inside Standard |
| Travel (MAX) |
25 Feet (Per ASME A17.1) |
| Stops (MAX) |
6 Stops |
| Car Speed |
30 FPM (Per ASME A17.1) |
| Openings (MAX) |
6 Openings |
| Operation |
Single Automatic Push-button, or (2)
Stop Collective |
| Floor Height (MIN) |
24 Inches |
| Pit Depth (MIN) |
3'-6" [1'-3" (Minimum)] |
| Overhead (MIN) |
11'-0" or (9'-6" Minimum) |
| Power Supply |
220-Single Phase - 30 Amp - 60 Hz
208 / 230 / 480 - 3 Phase - 60 Hz |
| Light Supply |
120 Vac - 15 Amp 60 Hz |
| Machine Room Size |
4'-6" x 5'-5" or 3'-0" x
5'-5" (Consult Local Authorities) |
| Machine Room Location |
Adjacent or Up to 50'-0" Remote |
|
- 1:2 Roped hydraulic system
- Two speed valve / single speed motor pump unit w/
lockable cover
- Microprocessor UL / C controller w/ Nema 1 lockable
cabinet
- Anti-creep releveling device
- Low oil protection timer
- Battery operated emergency lowering w/ alarm bell
- Top of car inspection
- Satin stainless steel signal fixtures faceplates
- Braille tags in car & hall
- Emergency car light (complies w/ ASME A17.1 rule
204.7a)
- Phone Box
- Fire rated cab and hoistway door system
- Baked enamel cab with stainless steel transom &
return
- Egg crate drop ceiling with fluorescent lighting
above
- 1/2" x 2" satin stainless steel handrail
- Two speed side opening power operated car and hatch
doors
- Prime finish doors & frames for 8" block or
3 3/4" drywall construction
- Gearless D.C. motor driven master door operator
- Safety edge door protection
- Pipe rupture valve
- Overspeed governor with type "A" car safety
- Roller guide shoes
- 8lb per foot steel "Tee" guide rails with
wall and cylinder mounting brackets
- Approved rope wedge sockets with (3) 3/8" dia. 6
x 19 traction steel cables
- Pre-wired car limits, selector, & leveling units
- Alarm bell with button
- Top final limit switch
- Pit stop switch
|
