| Type |
Roped Hydraulic / 2 speed Valve,
Single Speed Motor |
| Capacity (MAX) |
750 Lbs. |
| Car Size (MAX) |
12 Square Feet Inside (Per ASME
A17.1) 3'-0" x 4'-0" Inside Platform (Standard) |
| Travel (MAX) |
50 Feet (Per ASME A17.1) |
| Stops (MAX) |
6 Stops |
| Car Speed |
40 FPM (Maximum Per ASME A17.1) |
| Openings (MAX) |
12 Openings |
| Operation |
Single Automatic Push-button |
| Floor Height (MIN) |
24 Inches |
| Pit Depth (MIN) |
1'-0" |
| Overhead (MIN) |
8'-0" (9'-6" Recommended) |
| Power Supply |
220-Single Phase - 30 Amp - 60 Hz
(Standard)
208/230/480 - 3 Phase - 60 Hz (Optional) |
| Light Supply |
120 Vac - 15 Amp 60 Hz |
| Machine Room Size |
4'-6" x 5'-5" or 3'-0"
x 5'-5" (Consult Local Authorities) |
| Machine Room Location |
Adjacent or Up to 50'-0" Remote |
|
- 1:2 Roped hydraulic system
- Two speed valve / single speed motor pump unit w/
lockable cover
- Single automatic push button operation
- Microprocessor UL / C controller w/ Nema 1 lockable
cabinet
- Low oil protection timer
- Anti-creep releveling device
- Battery operated emergency lowering w/ alarm bell
- Saratoga Cab w/ 6'-8" clear inside height
- Accordion car door with laminate panels
- Stainless steel #4 fixture faceplates
- Emergency pilot light in car station
- Alarm bell w/ button
- Approved G.A.L. type "G" gate switch
- G.A.L. type "N" interlocks
- Pipe rupture valve & broken rope safety included
- Approved rope wedge sockets w/ (2) 3/8" dia. 6 x
19 traction steel cables.
- 8lb. per foot steel "T" rails w/ wall &
cylinder mtg. brackets
- Roller guide shoes
- Rubber buffers
- Pre-wired car limits, selector, & leveling units
- Top final limit switch
|
